This is only used when there is no signal, not during times of temporary no tone during the training sequence. This pattern continues until the broadband connection is successfully established. If the broadband connection fails to be established for more than three consecutive minutes the LED switches to Flashing Green when attempting or waiting to establish a broadband connection alternating with a five second steady Red. The gateway is attempting a broadband connection (i.e., DSL attempting sync). There is a good broadband connection (i.e., good DSL Sync).
There are no powered devices connected to Wi-Fi.Īctivity seen from devices connected via Wi-Fi (the flickering of the light is synchronized to actual data traffic). Powered device connected to the associated port (includes devices with wake-on-LAN capability where a slight voltage is supplied to the Ethernet connection).Īctivity seen from devices associated with the port (the flickering of the light is synchronized to actual data traffic). The gateway power is off, There are no powered devices connected to the Ethernet ports. When the device encounters a POST failure, all indicator lights on the front of the device continuously flash. Power-On Self-Test (POST) is in progress.Ī POST failure (not bootable) or device malfunction occurred. The following chart shows each status light variation and what it means, making diagnosing and troubleshooting technical issues with your NVG510 easier.
0 kommentar(er)
